Description
BRAND: BW
BW Clip4 – “Always On” Gas Detection Technology
You may not have time to constantly check your gas monitoring system during your busy work day. Now, thanks to BW Clip4’s “never sleep design”, you are protected without the hassles of charging the battery, replacing the battery or sensors. The BW Clip4 is a low-cost way to enjoy high-quality protection and you get the supporting technologies that come with Honeywell quality. Once you clip it on, it stays on.
Activate and Forget about it
Just activate your BW Clip4 and it stays on. You never change or charge the battery. This protection lasts for 2 full years.
BW Clip4 Features
Wear-ability
- Ergonomic in design. Light and wearable
- Compact — Even in close quarters, it won’t get in your way
Use-ability
- Operates with a single button
- Tamper proof design is user-friendly
- Sensitive LCD icons
- Gas readings in real-time
Compliance-ability
- Non compliance warning lights let you know that you need to bump test your detector
- Self-testing feature for sensors, battery status, alarms, and circuit integrity
Manageability
- Use your IntelliDoX docking system with instrument management systems
Reliability
- Concussion-proof boot
- Tested for extreme environments
Technical Specifications
- SIZE 4.7 x 2.7 x 1.3 in. / 12.0 x 6.8 x 3.2 cm
- WEIGHT 8.2 ounces. / 233 g
- OPERATING TEMPERATURE -4 to +131°F / -20 to +50°C
- HUMIDITY 5 – 95% RH (non-condensing) continuous
- INGRESS PROTECTION IP68(dust, sand, dirt, water)
- ALARMS AND TYPE Visual, vibrating, 95 dB audible; Low, High, TWA (time-weighted average) STEL, OL (over limit)
- SELF-TEST 1 internal diagnostic every day (24 hours) on sensors, battery, and circuitry by activated detectors
- BATTERY LIFE 2 years, continuous use
- EVENT LOG most recent 70 events
USER FEATURES
- Adjust short-term exposure limit period (5-15 minutes in 1 minute intervals)
- Calibration intervals and span levels
- Bump testing interval
- Set combustible gases measurement from 0-100% LEL (Lower Explosive Limit) or Methane gas 0-5.0% v/v
- Calibration due (1 to 365 days, or zero setting to turn off)
- enable or disable individual sensors
- Stealth mode option
- Latching alarms
CERTIFICATIONS AND APPROVALS :
- Class I, Div 1, Group A, B, C, D
- Class I, Zone 0, Group IIC
- ATEX: II 1G Ex ia IIC T4 Ga
- IECEx: Ex ia IIC T4 Ga
- X: Meets all applicable European directives.
- To check out additional certifications, go to the manual or to Honeywell Analytics.
WARRANTY Full 2 years including battery and sensors
We also have great connection to Gas Monitor Competence training.
Email us for more information.
Reviews
There are no reviews yet.